Fibreglass Braided Sleeve Supplier in Aligarh
Aligarh's lock and hardware makers run die-casting, annealing and electroplating lines. We braid white fiberglass sleeving in Faridabad with 1500-denier yarn and supply Aligarh buyers in 14 catalogue sizes, starting with oven and kiln control wiring.
Fiberglass sleeving for wires, leads and cables in Aligarh
Our Aligarh enquiries mostly come from lock, hardware and plating units. These are the jobs they use fibreglass braided sleeve for.
Oven and kiln control wiring
Covers control and sensor wiring on curing ovens, kilns and heat-treatment lines away from direct flame.
Ask about this useHeater and element lead wires
Sleeves cold-end leads of band, cartridge and coil heaters where wires sit close to the element.
Ask about this useStock for motor rewinding shops
Motor rewinders and insulation dealers stock 3 to 12 mm sizes for daily lead-wire work.
Ask about this useIndustrial areas we supply in and around Aligarh
- Talanagari
- Sasni Gate Industrial Area
- Agra Road
- Mathura Road
Pick a size by bundle diameter
Choose the size whose expansion range covers your wire or lead with room to slide it on. Nominal size is not the bundle limit.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-FBG-003 | 3 | 1 – 6 | 1000 | Thermocouple and fine lead wires | Quote for Aligarh |
| SYN-FBG-006 | 6 | 3 – 9 | 500 | Motor and heater lead wires | Quote for Aligarh |
| SYN-FBG-008 | 8 | 5 – 16 | 350 | Motor leads, transformer tappings | Quote for Aligarh |
| SYN-FBG-010 | 10 | 7 – 19 | 350 | Lead pairs and small bundles | Quote for Aligarh |
| SYN-FBG-012 | 12 | 8 – 24 | 350 | Winding connections, cable pairs | Quote for Aligarh |
| SYN-FBG-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Aligarh |
| SYN-FBG-019 | 19 | 14 – 30 | 200 | Cable bundles in hot enclosures | Quote for Aligarh |
| SYN-FBG-025 | 25 | 18 – 35 | 200 | Larger cable bundles | Quote for Aligarh |
| SYN-FBG-032 | 32 | 20 – 50 | 150 | Large bundles | Quote for Aligarh |
| SYN-FBG-038 | 38 | 30 – 60 | 100 | Large bundles and hoses | Quote for Aligarh |
| SYN-FBG-045 | 45 | 35 – 75 | 100 | Heavy cable runs | Quote for Aligarh |
| SYN-FBG-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Aligarh |
| SYN-FBG-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Aligarh |
| SYN-FBG-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Aligarh |
Catalogue references from our SYN-FBG series. Typical uses are a guide only. Thermal and electrical ratings are confirmed against the selected construction with your quotation. Full specifications are on the fibreglass braided sleeve product page.
Standard vs heat-treated fibreglass
Both are braided from glass fibre. Pick by the heat at the cable, the finish you need and the evidence your specification asks for.
White fibreglass braid
1500-denier yarn with custom denier and expansion. Suited to general high-temperature cable and lead covering. Grade data on request.
Heat-treated fibreglass
Bronze heat-treated construction with a −40 to +800 °C catalogue reference for radiant heat near furnaces and exhausts.
Nylon expandable sleeve
Where wear and rubbing matter more than heat, nylon braid gives tough abrasion protection.
How ordering works
Fibreglass braided sleeve for Aligarh is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Aligarh PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Is white fibreglass enough near furnaces?
For cables near furnace shells or radiant heat, heat-treated fibreglass is usually the better choice. Send the temperature at the cable and we will advise.
Which size suits heater lead wires?
Most heater leads fit SYN-FBG-003 to SYN-FBG-008. Measure the lead and choose the size whose expansion range covers it.
Do you supply motor rewinding dealers?
Yes. Dealers usually stock 3, 6, 8, 10 and 12 mm sizes. Our minimum order is 500 metres; confirm the size split and volume pricing in the quotation.
Is fibre glass sleeve available in H class?
Ask for the grade data that matches your insulation class. We confirm the test evidence available for the selected yarn and construction before you order.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of fibreglass braided sleeve in Aligarh?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Aligarh PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
From our unit to Aligarh
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in