Fibreglass Braided Sleeve Supplier in Baddi
Baddi-Barotiwala-Nalagarh has pharma, FMCG and electrical plants with dryers, sealers and ovens. We braid white fiberglass sleeving in Faridabad with 1500-denier yarn and supply Baddi buyers in 14 catalogue sizes, starting with irons, ovens and geysers.
Fiberglass sleeving for wires, leads and cables in Baddi
Our Baddi enquiries mostly come from pharma, FMCG and electrical plants. These are the jobs they use fibreglass braided sleeve for.
Irons, ovens and geysers
Internal wiring near elements and thermostats in irons, ovens, toasters and water heaters.
Ask about this useHeater and element lead wires
Sleeves cold-end leads of band, cartridge and coil heaters where wires sit close to the element.
Ask about this useMotor, pump and alternator leads
White glass braid over lead-out wires, joints and winding connections, where PVC sleeving softens during varnish curing.
Ask about this useIndustrial areas we supply in and around Baddi
- Baddi Industrial Area
- Barotiwala
- Nalagarh
- Jharmajri
Pick a size by bundle diameter
Choose the size whose expansion range covers your wire or lead with room to slide it on. Nominal size is not the bundle limit.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-FBG-003 | 3 | 1 – 6 | 1000 | Thermocouple and fine lead wires | Quote for Baddi |
| SYN-FBG-006 | 6 | 3 – 9 | 500 | Motor and heater lead wires | Quote for Baddi |
| SYN-FBG-008 | 8 | 5 – 16 | 350 | Motor leads, transformer tappings | Quote for Baddi |
| SYN-FBG-010 | 10 | 7 – 19 | 350 | Lead pairs and small bundles | Quote for Baddi |
| SYN-FBG-012 | 12 | 8 – 24 | 350 | Winding connections, cable pairs | Quote for Baddi |
| SYN-FBG-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Baddi |
| SYN-FBG-019 | 19 | 14 – 30 | 200 | Cable bundles in hot enclosures | Quote for Baddi |
| SYN-FBG-025 | 25 | 18 – 35 | 200 | Larger cable bundles | Quote for Baddi |
| SYN-FBG-032 | 32 | 20 – 50 | 150 | Large bundles | Quote for Baddi |
| SYN-FBG-038 | 38 | 30 – 60 | 100 | Large bundles and hoses | Quote for Baddi |
| SYN-FBG-045 | 45 | 35 – 75 | 100 | Heavy cable runs | Quote for Baddi |
| SYN-FBG-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Baddi |
| SYN-FBG-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Baddi |
| SYN-FBG-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Baddi |
Catalogue references from our SYN-FBG series. Typical uses are a guide only. Thermal and electrical ratings are confirmed against the selected construction with your quotation. Full specifications are on the fibreglass braided sleeve product page.
Standard vs heat-treated fibreglass
Both are braided from glass fibre. Pick by the heat at the cable, the finish you need and the evidence your specification asks for.
White fibreglass braid
1500-denier yarn with custom denier and expansion. Suited to general high-temperature cable and lead covering. Grade data on request.
Heat-treated fibreglass
Bronze heat-treated construction with a −40 to +800 °C catalogue reference for radiant heat near furnaces and exhausts.
Nylon expandable sleeve
Where wear and rubbing matter more than heat, nylon braid gives tough abrasion protection.
How ordering works
Fibreglass braided sleeve for Baddi is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Baddi PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Which size suits heater lead wires?
Most heater leads fit SYN-FBG-003 to SYN-FBG-008. Measure the lead and choose the size whose expansion range covers it.
Is fibreglass sleeve used for motor lead wires?
Yes. Motor, pump and alternator makers and rewinders use it over lead-out wires and joints. Tell us the lead diameter and insulation class and we confirm the size and available grade data.
Is fibre glass sleeve available in H class?
Ask for the grade data that matches your insulation class. We confirm the test evidence available for the selected yarn and construction before you order.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of fibreglass braided sleeve in Baddi?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Baddi PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
How long does delivery to Baddi take?
We dispatch from Faridabad by road transport or courier. Transit time to Baddi depends on the route and order size, so we confirm it with the quotation.
From our unit to Baddi
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in