Polyamide Flexible Conduit Pipes & Fittings in Chakan
Chakan is one of India's densest automotive belts, with vehicle plants and suppliers along the Pune-Nashik highway. Their harness and machine wiring calls for FR-grade conduit and reliable elbows.
Conduit systems for automotive wiring and harness lines
Most of our Chakan enquiries come from automotive manufacturers. These are the products they usually start with.
PA-6 Heavy Weight FR conduit
Rated -40 to +105 °C with UL 94 V-0, for engine-bay and underbody routing.
View sizes and specs90° elbow connectors
Tight turns out of control boxes and sensors without kinking the conduit.
View sizes and specsPA-6 Slit conduit
Fits over a finished harness for rework and retrofit, no disconnection needed.
View sizes and specsIndustrial areas we supply in and around Chakan
- Chakan MIDC Phase I to V
- Talegaon
- Mahalunge
- Kuruli
End fittings and accessories for every conduit
A conduit run is only as good as its ends. Order the connectors, locknuts, seals and clamps with the conduit so every part matches.
End fittings: straight connectors
Polyamide body, PG 09 to PG 48 or M16 to M50 thread. The standard entry into boxes and panels.
90° elbow and 45° bend connectors
Turn the run at the entry point without bending the conduit tighter than its radius.
Hexagonal locknuts
Nickel-plated brass, PG 11 to PG 48 and M12 to M50. Lock the connector to the wall.
Sealing washers
Reinforced NBR, -30 to +105 °C. Seal the connector against the enclosure.
Sealing rings
NBR rings SR10 to SR70 between conduit and connector.
Tube clamps
Galvanised steel with elastomer profile, GSTC-12 to GSTC-48. Fix conduit to frames.
Flange connectors
Straight and elbow flanges for NW-70 and NW-95 heavy runs.
From our Faridabad unit
Conduit is coiled, wrapped and strapped at our unit before it leaves for Chakan. Fittings and accessories are packed with the same order.
Match conduit and accessories by size
Pick the conduit size, then read across for the connector, locknut, washer, ring and clamp that fit it.
| Size | FR conduit code | OD (mm) | Straight connector, PG | Straight connector, metric | Locknut | Sealing washer | Sealing ring | Tube clamp |
|---|---|---|---|---|---|---|---|---|
| NW-10 | PABC-10BV0 | 13 | PSC-PG09 | PSC-M16C10 | BLNM-M16 | OSW-M16 | SR10 | — |
| NW-12 | PABC-12BV0 | 15.8 | PSC-PG11 | PSC-M16C12 | BLNP-PG11 / BLNM-M16 | OSW-PG11 / OSW-M16 | SR12 | GSTC-12 |
| NW-17 | PABC-17BV0 | 21.2 | PSC-PG16 | PSC-M20C17 | BLNP-PG16 / BLNM-M20 | OSW-PG16 / OSW-M20 | SR17 | GSTC-17 |
| NW-23 | PABC-23BV0 | 28.5 | PSC-PG21 | PSC-M25C23 | BLNP-PG21 / BLNM-M25 | OSW-PG21 / OSW-M25 | SR23 | GSTC-23 |
| NW-29 | PABC-29BV0 | 31.4 | PSC-PG29 | PSC-M32C29 | BLNP-PG29 / BLNM-M32 | OSW-PG29 / OSW-M32 | SR29 | GSTC-29 |
| NW-36 | PABC-36BV0 | 42.4 | PSC-PG36 | PSC-M40C36 | BLNP-PG36 / BLNM-M40 | OSW-PG36 / OSW-M40 | SR36 | GSTC-36 |
| NW-48 | PABC-48BV0 | 51.4 | PSC-PG48 | PSC-M50C48 | BLNP-PG48 / BLNM-M50 | OSW-PG48 / OSW-M50 | SR48 | GSTC-48 |
| NW-70 | PABC-70BV0 | 80 | PFC-PG70 (flange) | — | — | — | SR70 | — |
Codes from our published catalogue. The same NW sizes apply to light weight, slit and PE conduit. 45° and 90° connectors follow the same thread sizes (PBC- and PEC- codes). Confirm thread and assembly with your quote before ordering.
How ordering works
Orders for Chakan are dispatched from Faridabad by road transport or courier. Freight and transit time are quoted with each order, based on volume and your PIN code.
- Send sizes, quantities and fittings, with your delivery city and PIN code.
- We confirm the matched system, price, lead time and freight.
- We dispatch from our Faridabad unit with the documents you need.
Which grade do Chakan automotive suppliers specify?
Usually PA-6 Heavy Weight FR conduit (UL 94 V-0, halogen-free) with 90° and 45° connectors.
Can you deliver to Chakan MIDC directly?
Yes. Give your plant address and PIN code in the enquiry and we quote freight to the gate.
What sizes of polyamide flexible conduit can you supply in Chakan?
PA-6 flexible conduit from NW-10 (13 mm OD) to NW-70 (80 mm OD), in heavy weight FR, light weight, slit and PE versions, with matching fittings.
Do you supply the fittings and accessories as well?
Yes. Straight, 45°, 90° and flange connectors, hexagonal locknuts, sealing washers, sealing rings and tube clamps, matched to each conduit size.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in