Heat-Treated Fibreglass Sleeve Supplier in Jalandhar
Jalandhar's Focal Point makes hand tools, valves, rubber goods and sports equipment, with forging and curing heat. We manufacture bronze heat-treated fiberglass sleeving in Faridabad and supply Jalandhar buyers in 14 catalogue sizes, starting with furnaces, kilns and ovens.
High-temperature sleeving for wires, cables and hoses in Jalandhar
Our Jalandhar enquiries mostly come from hand-tool, valve and rubber units. These are the jobs they use heat-treated fibreglass sleeve for.
Furnaces, kilns and ovens
Covers thermocouple, control and power cables near furnace shells, kilns, heat-treatment lines and curing ovens.
Ask about this useHeating elements and heater leads
Sleeves the cold-end leads of cartridge, band, tubular and coil heaters, where wiring sits millimetres from the element.
Ask about this useDistributor and dealer stock
Mixed-size spools for electrical and insulation dealers who supply motor rewinders, heater makers and maintenance teams.
Ask about this useIndustrial areas we supply in and around Jalandhar
- Focal Point
- Focal Point Extension
- Industrial Area Jalandhar
- Leather Complex
Pick a size by bundle diameter
Nominal size is not the bundle limit. Choose the size whose expansion range covers your wire, cable or hose, with room to slide it on.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-HTFS-003 | 3 | 1 – 6 | 1000 | Thermocouple and heater leads | Quote for Jalandhar |
| SYN-HTFS-006 | 6 | 3 – 9 | 500 | Heater and motor lead wires | Quote for Jalandhar |
| SYN-HTFS-008 | 8 | 5 – 16 | 350 | Motor leads, sensor pairs | Quote for Jalandhar |
| SYN-HTFS-010 | 10 | 7 – 19 | 350 | Small harness branches | Quote for Jalandhar |
| SYN-HTFS-012 | 12 | 8 – 24 | 350 | Harness branches, cable pairs | Quote for Jalandhar |
| SYN-HTFS-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Jalandhar |
| SYN-HTFS-019 | 19 | 14 – 30 | 200 | Cable bundles near ovens | Quote for Jalandhar |
| SYN-HTFS-025 | 25 | 18 – 35 | 200 | Hose and cable bundles | Quote for Jalandhar |
| SYN-HTFS-032 | 32 | 20 – 50 | 150 | Hydraulic hoses, larger bundles | Quote for Jalandhar |
| SYN-HTFS-038 | 38 | 30 – 60 | 100 | Hoses near furnaces | Quote for Jalandhar |
| SYN-HTFS-045 | 45 | 35 – 75 | 100 | Heavy hose and cable runs | Quote for Jalandhar |
| SYN-HTFS-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Jalandhar |
| SYN-HTFS-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Jalandhar |
| SYN-HTFS-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Jalandhar |
Catalogue references from our SYN-HT-FBG series. Typical uses are a guide only. Confirm construction, expansion and service conditions with your quotation. Full specifications are on the heat-treated fibreglass sleeve product page.
Heat-treated vs standard fibreglass sleeve
Heat treatment gives the braid its bronze finish and is a separate construction from standard white fibreglass sleeving.
−40 to +800 °C catalogue reference
For radiant heat near furnaces, elements and exhausts. Confirm continuous and peak exposure with the grade data before you specify.
Standard fibreglass sleeve
White expandable fibreglass braid with 1500-denier yarn for general cable covering. Thermal and electrical ratings on request.
Aramid / Kevlar sleeve
When cut and abrasion resistance matter as much as heat, compare aramid braided sleeving.
How ordering works
Heat-treated fibreglass sleeve for Jalandhar is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Jalandhar PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Can it protect thermocouple cables near furnaces?
It is widely used over thermocouple and compensating cables near furnaces and ovens. State the surface temperature, distance from the heat source and exposure time so we can confirm suitability.
What size do I need for heater lead wires?
Most heater leads fall in the 3 mm to 8 mm nominal range (SYN-HTFS-003 to SYN-HTFS-008). Measure the lead or pair and pick the size whose expansion range covers it comfortably.
Do you supply dealers and distributors?
Yes. Dealers usually take a spread of sizes such as 3, 6, 8, 10 and 12 mm. Our minimum order is 500 metres; confirm the size split and volume pricing in the quotation.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of heat-treated fibreglass sleeve in Jalandhar?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Jalandhar PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
How long does delivery to Jalandhar take?
We dispatch from Faridabad by road transport or courier. Transit time to Jalandhar depends on the route and order size, so we confirm it with the quotation.
From our unit to Jalandhar
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in