Heat-Treated Fibreglass Sleeve Supplier in Mehsana
Mehsana and Mandal-Becharaji host car and two-wheeler plants plus dairy and food-processing equipment makers. We manufacture bronze heat-treated fiberglass sleeving in Faridabad and supply Mehsana buyers in 14 catalogue sizes, starting with engine-bay and exhaust-side harnesses.
High-temperature sleeving for wires, cables and hoses in Mehsana
Our Mehsana enquiries mostly come from automotive and dairy-equipment suppliers. These are the jobs they use heat-treated fibreglass sleeve for.
Engine-bay and exhaust-side harnesses
Guards harness branches, sensor leads and hoses that pass near turbochargers, manifolds and exhaust lines.
Ask about this useIrons, ovens, geysers and HVAC
Fits internal wiring near elements, thermostats and compressors in irons, ovens, water heaters, toasters and HVAC units.
Ask about this useHeating elements and heater leads
Sleeves the cold-end leads of cartridge, band, tubular and coil heaters, where wiring sits millimetres from the element.
Ask about this useIndustrial areas we supply in and around Mehsana
- Mehsana GIDC
- Mandal-Becharaji
- Kadi
- Kalol (Gandhinagar)
Pick a size by bundle diameter
Nominal size is not the bundle limit. Choose the size whose expansion range covers your wire, cable or hose, with room to slide it on.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-HTFS-003 | 3 | 1 – 6 | 1000 | Thermocouple and heater leads | Quote for Mehsana |
| SYN-HTFS-006 | 6 | 3 – 9 | 500 | Heater and motor lead wires | Quote for Mehsana |
| SYN-HTFS-008 | 8 | 5 – 16 | 350 | Motor leads, sensor pairs | Quote for Mehsana |
| SYN-HTFS-010 | 10 | 7 – 19 | 350 | Small harness branches | Quote for Mehsana |
| SYN-HTFS-012 | 12 | 8 – 24 | 350 | Harness branches, cable pairs | Quote for Mehsana |
| SYN-HTFS-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Mehsana |
| SYN-HTFS-019 | 19 | 14 – 30 | 200 | Cable bundles near ovens | Quote for Mehsana |
| SYN-HTFS-025 | 25 | 18 – 35 | 200 | Hose and cable bundles | Quote for Mehsana |
| SYN-HTFS-032 | 32 | 20 – 50 | 150 | Hydraulic hoses, larger bundles | Quote for Mehsana |
| SYN-HTFS-038 | 38 | 30 – 60 | 100 | Hoses near furnaces | Quote for Mehsana |
| SYN-HTFS-045 | 45 | 35 – 75 | 100 | Heavy hose and cable runs | Quote for Mehsana |
| SYN-HTFS-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Mehsana |
| SYN-HTFS-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Mehsana |
| SYN-HTFS-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Mehsana |
Catalogue references from our SYN-HT-FBG series. Typical uses are a guide only. Confirm construction, expansion and service conditions with your quotation. Full specifications are on the heat-treated fibreglass sleeve product page.
Heat-treated vs standard fibreglass sleeve
Heat treatment gives the braid its bronze finish and is a separate construction from standard white fibreglass sleeving.
−40 to +800 °C catalogue reference
For radiant heat near furnaces, elements and exhausts. Confirm continuous and peak exposure with the grade data before you specify.
Standard fibreglass sleeve
White expandable fibreglass braid with 1500-denier yarn for general cable covering. Thermal and electrical ratings on request.
Aramid / Kevlar sleeve
When cut and abrasion resistance matter as much as heat, compare aramid braided sleeving.
How ordering works
Heat-treated fibreglass sleeve for Mehsana is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Mehsana PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Do you supply automotive tier suppliers?
Yes. We supply harness and component makers on scheduled orders. Material declarations (RoHS, REACH) are on our site and grade test data is supplied on request for PPAP files.
Do appliance makers order on a schedule?
Yes. Appliance OEMs usually fix two or three sizes and call off spools monthly. Share the sizes and monthly metres and we quote against your schedule.
What size do I need for heater lead wires?
Most heater leads fall in the 3 mm to 8 mm nominal range (SYN-HTFS-003 to SYN-HTFS-008). Measure the lead or pair and pick the size whose expansion range covers it comfortably.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of heat-treated fibreglass sleeve in Mehsana?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Mehsana PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
How long does delivery to Mehsana take?
We dispatch from Faridabad by road transport or courier. Transit time to Mehsana depends on the route and order size, so we confirm it with the quotation.
From our unit to Mehsana
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in