Fibreglass Braided Sleeve Supplier in Nashik
Nashik's Satpur and Ambad MIDCs supply vehicle, switchgear and electrical equipment makers. We braid white fiberglass sleeving in Faridabad with 1500-denier yarn and supply Nashik buyers in 14 catalogue sizes, starting with harness sections near engine heat.
Fiberglass sleeving for wires, leads and cables in Nashik
Our Nashik enquiries mostly come from automotive and electrical manufacturers. These are the jobs they use fibreglass braided sleeve for.
Harness sections near engine heat
Protects harness branches and sensor leads in warm engine-bay zones; step up to heat-treated sleeve near exhausts.
Ask about this useGenerator and switchgear wiring
Lead and control-wire covering in generators, gensets and switchgear during manufacture and overhaul.
Ask about this useHeater and element lead wires
Sleeves cold-end leads of band, cartridge and coil heaters where wires sit close to the element.
Ask about this useIndustrial areas we supply in and around Nashik
- Satpur MIDC
- Ambad MIDC
- Sinnar MIDC
- Igatpuri
Pick a size by bundle diameter
Choose the size whose expansion range covers your wire or lead with room to slide it on. Nominal size is not the bundle limit.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-FBG-003 | 3 | 1 – 6 | 1000 | Thermocouple and fine lead wires | Quote for Nashik |
| SYN-FBG-006 | 6 | 3 – 9 | 500 | Motor and heater lead wires | Quote for Nashik |
| SYN-FBG-008 | 8 | 5 – 16 | 350 | Motor leads, transformer tappings | Quote for Nashik |
| SYN-FBG-010 | 10 | 7 – 19 | 350 | Lead pairs and small bundles | Quote for Nashik |
| SYN-FBG-012 | 12 | 8 – 24 | 350 | Winding connections, cable pairs | Quote for Nashik |
| SYN-FBG-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Nashik |
| SYN-FBG-019 | 19 | 14 – 30 | 200 | Cable bundles in hot enclosures | Quote for Nashik |
| SYN-FBG-025 | 25 | 18 – 35 | 200 | Larger cable bundles | Quote for Nashik |
| SYN-FBG-032 | 32 | 20 – 50 | 150 | Large bundles | Quote for Nashik |
| SYN-FBG-038 | 38 | 30 – 60 | 100 | Large bundles and hoses | Quote for Nashik |
| SYN-FBG-045 | 45 | 35 – 75 | 100 | Heavy cable runs | Quote for Nashik |
| SYN-FBG-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Nashik |
| SYN-FBG-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Nashik |
| SYN-FBG-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Nashik |
Catalogue references from our SYN-FBG series. Typical uses are a guide only. Thermal and electrical ratings are confirmed against the selected construction with your quotation. Full specifications are on the fibreglass braided sleeve product page.
Standard vs heat-treated fibreglass
Both are braided from glass fibre. Pick by the heat at the cable, the finish you need and the evidence your specification asks for.
White fibreglass braid
1500-denier yarn with custom denier and expansion. Suited to general high-temperature cable and lead covering. Grade data on request.
Heat-treated fibreglass
Bronze heat-treated construction with a −40 to +800 °C catalogue reference for radiant heat near furnaces and exhausts.
Nylon expandable sleeve
Where wear and rubbing matter more than heat, nylon braid gives tough abrasion protection.
How ordering works
Fibreglass braided sleeve for Nashik is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Nashik PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Fibreglass or heat-treated for engine bays?
Standard white fibreglass suits warm zones. For exhaust-side or turbo areas choose heat-treated fibreglass sleeve, which has a −40 to +800 °C catalogue reference.
Which size suits heater lead wires?
Most heater leads fit SYN-FBG-003 to SYN-FBG-008. Measure the lead and choose the size whose expansion range covers it.
Is fibre glass sleeve available in H class?
Ask for the grade data that matches your insulation class. We confirm the test evidence available for the selected yarn and construction before you order.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of fibreglass braided sleeve in Nashik?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Nashik PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
How long does delivery to Nashik take?
We dispatch from Faridabad by road transport or courier. Transit time to Nashik depends on the route and order size, so we confirm it with the quotation.
From our unit to Nashik
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in