Fibreglass Braided Sleeve Supplier in Sangli
Sangli's Kupwad and Miraj MIDCs run foundries, engineering shops and sugar-plant equipment makers. We braid white fiberglass sleeving in Faridabad with 1500-denier yarn and supply Sangli buyers in 14 catalogue sizes, starting with cables in hot plant areas.
Fiberglass sleeving for wires, leads and cables in Sangli
Our Sangli enquiries mostly come from foundry and engineering units. These are the jobs they use fibreglass braided sleeve for.
Cables in hot plant areas
General cable covering in mills and foundries where ambient heat ages plastic sleeving.
Ask about this useOven and kiln control wiring
Covers control and sensor wiring on curing ovens, kilns and heat-treatment lines away from direct flame.
Ask about this useMotor, pump and alternator leads
White glass braid over lead-out wires, joints and winding connections, where PVC sleeving softens during varnish curing.
Ask about this useIndustrial areas we supply in and around Sangli
- Kupwad MIDC
- Miraj MIDC
- Sangli MIDC
- Islampur
Pick a size by bundle diameter
Choose the size whose expansion range covers your wire or lead with room to slide it on. Nominal size is not the bundle limit.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-FBG-003 | 3 | 1 – 6 | 1000 | Thermocouple and fine lead wires | Quote for Sangli |
| SYN-FBG-006 | 6 | 3 – 9 | 500 | Motor and heater lead wires | Quote for Sangli |
| SYN-FBG-008 | 8 | 5 – 16 | 350 | Motor leads, transformer tappings | Quote for Sangli |
| SYN-FBG-010 | 10 | 7 – 19 | 350 | Lead pairs and small bundles | Quote for Sangli |
| SYN-FBG-012 | 12 | 8 – 24 | 350 | Winding connections, cable pairs | Quote for Sangli |
| SYN-FBG-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Sangli |
| SYN-FBG-019 | 19 | 14 – 30 | 200 | Cable bundles in hot enclosures | Quote for Sangli |
| SYN-FBG-025 | 25 | 18 – 35 | 200 | Larger cable bundles | Quote for Sangli |
| SYN-FBG-032 | 32 | 20 – 50 | 150 | Large bundles | Quote for Sangli |
| SYN-FBG-038 | 38 | 30 – 60 | 100 | Large bundles and hoses | Quote for Sangli |
| SYN-FBG-045 | 45 | 35 – 75 | 100 | Heavy cable runs | Quote for Sangli |
| SYN-FBG-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Sangli |
| SYN-FBG-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Sangli |
| SYN-FBG-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Sangli |
Catalogue references from our SYN-FBG series. Typical uses are a guide only. Thermal and electrical ratings are confirmed against the selected construction with your quotation. Full specifications are on the fibreglass braided sleeve product page.
Standard vs heat-treated fibreglass
Both are braided from glass fibre. Pick by the heat at the cable, the finish you need and the evidence your specification asks for.
White fibreglass braid
1500-denier yarn with custom denier and expansion. Suited to general high-temperature cable and lead covering. Grade data on request.
Heat-treated fibreglass
Bronze heat-treated construction with a −40 to +800 °C catalogue reference for radiant heat near furnaces and exhausts.
Nylon expandable sleeve
Where wear and rubbing matter more than heat, nylon braid gives tough abrasion protection.
How ordering works
Fibreglass braided sleeve for Sangli is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Sangli PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Is white fibreglass enough near furnaces?
For cables near furnace shells or radiant heat, heat-treated fibreglass is usually the better choice. Send the temperature at the cable and we will advise.
Is fibreglass sleeve used for motor lead wires?
Yes. Motor, pump and alternator makers and rewinders use it over lead-out wires and joints. Tell us the lead diameter and insulation class and we confirm the size and available grade data.
Is fibre glass sleeve available in H class?
Ask for the grade data that matches your insulation class. We confirm the test evidence available for the selected yarn and construction before you order.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of fibreglass braided sleeve in Sangli?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Sangli PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
How long does delivery to Sangli take?
We dispatch from Faridabad by road transport or courier. Transit time to Sangli depends on the route and order size, so we confirm it with the quotation.
From our unit to Sangli
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in