Heat-Treated Fibreglass Sleeve Supplier in Vapi
Vapi GIDC's chemical, paper and plastics plants run dryers and heated process lines, alongside wire and cable makers. We manufacture bronze heat-treated fiberglass sleeving in Faridabad and supply Vapi buyers in 14 catalogue sizes, starting with refinery, chemical and process plants.
High-temperature sleeving for wires, cables and hoses in Vapi
Our Vapi enquiries mostly come from process plants and cable makers. These are the jobs they use heat-treated fibreglass sleeve for.
Refinery, chemical and process plants
Protects instrument, heat-trace and control cables around reactors, heaters, dryers and steam lines.
Ask about this useHeating elements and heater leads
Sleeves the cold-end leads of cartridge, band, tubular and coil heaters, where wiring sits millimetres from the element.
Ask about this useMotor and pump winding leads
Covers lead-out wires and connections on motors, submersible pumps and alternators where varnish curing and winding heat cook PVC sleeving.
Ask about this useIndustrial areas we supply in and around Vapi
- Vapi GIDC
- Sarigam
- Umbergaon
- Silvassa
Pick a size by bundle diameter
Nominal size is not the bundle limit. Choose the size whose expansion range covers your wire, cable or hose, with room to slide it on.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-HTFS-003 | 3 | 1 – 6 | 1000 | Thermocouple and heater leads | Quote for Vapi |
| SYN-HTFS-006 | 6 | 3 – 9 | 500 | Heater and motor lead wires | Quote for Vapi |
| SYN-HTFS-008 | 8 | 5 – 16 | 350 | Motor leads, sensor pairs | Quote for Vapi |
| SYN-HTFS-010 | 10 | 7 – 19 | 350 | Small harness branches | Quote for Vapi |
| SYN-HTFS-012 | 12 | 8 – 24 | 350 | Harness branches, cable pairs | Quote for Vapi |
| SYN-HTFS-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Vapi |
| SYN-HTFS-019 | 19 | 14 – 30 | 200 | Cable bundles near ovens | Quote for Vapi |
| SYN-HTFS-025 | 25 | 18 – 35 | 200 | Hose and cable bundles | Quote for Vapi |
| SYN-HTFS-032 | 32 | 20 – 50 | 150 | Hydraulic hoses, larger bundles | Quote for Vapi |
| SYN-HTFS-038 | 38 | 30 – 60 | 100 | Hoses near furnaces | Quote for Vapi |
| SYN-HTFS-045 | 45 | 35 – 75 | 100 | Heavy hose and cable runs | Quote for Vapi |
| SYN-HTFS-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Vapi |
| SYN-HTFS-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Vapi |
| SYN-HTFS-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Vapi |
Catalogue references from our SYN-HT-FBG series. Typical uses are a guide only. Confirm construction, expansion and service conditions with your quotation. Full specifications are on the heat-treated fibreglass sleeve product page.
Heat-treated vs standard fibreglass sleeve
Heat treatment gives the braid its bronze finish and is a separate construction from standard white fibreglass sleeving.
−40 to +800 °C catalogue reference
For radiant heat near furnaces, elements and exhausts. Confirm continuous and peak exposure with the grade data before you specify.
Standard fibreglass sleeve
White expandable fibreglass braid with 1500-denier yarn for general cable covering. Thermal and electrical ratings on request.
Aramid / Kevlar sleeve
When cut and abrasion resistance matter as much as heat, compare aramid braided sleeving.
How ordering works
Heat-treated fibreglass sleeve for Vapi is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Vapi PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Is the sleeve suitable for process plants?
Process and chemical plants use it over instrument and heat-trace cables in hot zones. Check chemical exposure with us too, since fibreglass and its finish behave differently from polymer sleeves.
What size do I need for heater lead wires?
Most heater leads fall in the 3 mm to 8 mm nominal range (SYN-HTFS-003 to SYN-HTFS-008). Measure the lead or pair and pick the size whose expansion range covers it comfortably.
Is heat-treated fibreglass sleeve used for motor lead wires?
Yes. Motor, pump and alternator makers use it over lead-out wires and joints near the winding. Send the lead diameter, insulation class and curing temperature and we suggest a size and confirm the grade data.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of heat-treated fibreglass sleeve in Vapi?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Vapi PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
How long does delivery to Vapi take?
We dispatch from Faridabad by road transport or courier. Transit time to Vapi depends on the route and order size, so we confirm it with the quotation.
From our unit to Vapi
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in