Heat-Treated Fibreglass Sleeve Supplier in Morbi
Morbi makes most of India's ceramic tiles, and its kilns and dryers run hot around the clock. We manufacture bronze heat-treated fiberglass sleeving in Faridabad and supply Morbi buyers in 14 catalogue sizes, starting with glass furnaces and ceramic kilns.
High-temperature sleeving for wires, cables and hoses in Morbi
Our Morbi enquiries mostly come from ceramic tile and sanitaryware kilns. These are the jobs they use heat-treated fibreglass sleeve for.
Glass furnaces and ceramic kilns
Protects wiring and sensors on glass furnaces, annealing lehrs and ceramic kilns, where radiant heat is constant.
Ask about this useFurnaces, kilns and ovens
Covers thermocouple, control and power cables near furnace shells, kilns, heat-treatment lines and curing ovens.
Ask about this useHeating elements and heater leads
Sleeves the cold-end leads of cartridge, band, tubular and coil heaters, where wiring sits millimetres from the element.
Ask about this useIndustrial areas we supply in and around Morbi
- Lalpar
- Rafaleshwar
- Ghuntu Road
- Wankaner
Pick a size by bundle diameter
Nominal size is not the bundle limit. Choose the size whose expansion range covers your wire, cable or hose, with room to slide it on.
| Reference | Nominal (mm) | Expansion range (mm) | Spool (m) | Typical use | Enquiry |
|---|---|---|---|---|---|
| SYN-HTFS-003 | 3 | 1 – 6 | 1000 | Thermocouple and heater leads | Quote for Morbi |
| SYN-HTFS-006 | 6 | 3 – 9 | 500 | Heater and motor lead wires | Quote for Morbi |
| SYN-HTFS-008 | 8 | 5 – 16 | 350 | Motor leads, sensor pairs | Quote for Morbi |
| SYN-HTFS-010 | 10 | 7 – 19 | 350 | Small harness branches | Quote for Morbi |
| SYN-HTFS-012 | 12 | 8 – 24 | 350 | Harness branches, cable pairs | Quote for Morbi |
| SYN-HTFS-016 | 16 | 10 – 27 | 250 | Control cable bundles | Quote for Morbi |
| SYN-HTFS-019 | 19 | 14 – 30 | 200 | Cable bundles near ovens | Quote for Morbi |
| SYN-HTFS-025 | 25 | 18 – 35 | 200 | Hose and cable bundles | Quote for Morbi |
| SYN-HTFS-032 | 32 | 20 – 50 | 150 | Hydraulic hoses, larger bundles | Quote for Morbi |
| SYN-HTFS-038 | 38 | 30 – 60 | 100 | Hoses near furnaces | Quote for Morbi |
| SYN-HTFS-045 | 45 | 35 – 75 | 100 | Heavy hose and cable runs | Quote for Morbi |
| SYN-HTFS-050 | 50 | 40 – 80 | 100 | Large hose runs | Quote for Morbi |
| SYN-HTFS-064 | 64 | 45 – 105 | 100 | Large bundles and hoses | Quote for Morbi |
| SYN-HTFS-076 | 76 | 64 – 120 | 100 | Largest bundles and hoses | Quote for Morbi |
Catalogue references from our SYN-HT-FBG series. Typical uses are a guide only. Confirm construction, expansion and service conditions with your quotation. Full specifications are on the heat-treated fibreglass sleeve product page.
Heat-treated vs standard fibreglass sleeve
Heat treatment gives the braid its bronze finish and is a separate construction from standard white fibreglass sleeving.
−40 to +800 °C catalogue reference
For radiant heat near furnaces, elements and exhausts. Confirm continuous and peak exposure with the grade data before you specify.
Standard fibreglass sleeve
White expandable fibreglass braid with 1500-denier yarn for general cable covering. Thermal and electrical ratings on request.
Aramid / Kevlar sleeve
When cut and abrasion resistance matter as much as heat, compare aramid braided sleeving.
How ordering works
Heat-treated fibreglass sleeve for Morbi is dispatched from our Faridabad unit by road transport or courier. We quote the price and freight together, based on size, quantity and your PIN code. Our minimum order is 500 metres.
- Send the size, quantity, application and your Morbi PIN code.
- We confirm the reference, price, lead time and freight.
- We dispatch with the invoice, HSN code and any documents you ask for.
Is it suitable for glass and ceramic plants?
Glass and ceramic units use it over sensor, burner and control wiring near furnaces and kilns. Share the temperature at the cable and we will confirm the grade.
Can it protect thermocouple cables near furnaces?
It is widely used over thermocouple and compensating cables near furnaces and ovens. State the surface temperature, distance from the heat source and exposure time so we can confirm suitability.
What size do I need for heater lead wires?
Most heater leads fall in the 3 mm to 8 mm nominal range (SYN-HTFS-003 to SYN-HTFS-008). Measure the lead or pair and pick the size whose expansion range covers it comfortably.
What HSN code applies to fibreglass sleeving?
Glass-fibre sleeving generally falls under HSN chapter 7019. We state the exact HSN code and GST rate on the quotation and invoice.
What is the price of heat-treated fibreglass sleeve in Morbi?
Price depends on size, construction and quantity. Send the sizes and quantities you need with your Morbi PIN code and we quote the price and freight from Faridabad together. Our minimum order is 500 metres.
How long does delivery to Morbi take?
We dispatch from Faridabad by road transport or courier. Transit time to Morbi depends on the route and order size, so we confirm it with the quotation.
From our unit to Morbi
Products are made, packed and dispatched from our Faridabad unit. Company RoHS and REACH declarations and ISO 9001 certification are on our quality page.
Synflex Industries LLP, Plot No. 219, Sector 24, Faridabad, Haryana 121004 · +91 99716 72051 · info@synflex.in